|
 |
V20 SERIES |
|
DIRECTIONAL CONTROL
VALVE |
Muncie Power Products
is proud to offer the V20 series of directional control valves. The V20's
valve design allows it to be assembled with numerous spool types, control
styles and port options to fit your application needs.
-
 Utility
Equipment
- Dump Bodies
- Spreaders
- Recovery Equipment
- Lube Trucks
- Cranes
- Refuse Equipment
- and many more applications
VALVE
FEATURES
- High tensile ductile iron for durability and shock load resistance.
- Compact size and lightweight to fit your installation needs.
- Precision machined spools with extra
fine metering control and low spool forces.
- Available in SAE or NPT porting.
- Stackable design to customize to your needs.
- Large variety of spool types and backcap options.
- Wide range of work ports options including port reliefs, anti-cavitation valves, port restrictors, pilot operated check valves (lock valves) and power beyond capabilities.
|
TECHNICAL DATA
|
| Design Type |
Sectional |
| Circuit |
Open Center Design: Parallel, Tandem,
Combined Parallel/Tandem, & Series. Also Closed Center, Load
Sensing, Load Sensing/Pressure Compensation available. |
| Capacity |
20 GPM (76 LPM) Nominal, 30 GPM (114 LPM)
Maximum |
| Maximum System
Pressure |
3500 PSI (242 BAR) |
| Maximum Tank
Pressure |
200 PSI (13.8 BAR) |
| Filtration |
33 Micron |
| Spool Force |
50 Lbs. (22.7 Kg) Maximum |
| Temperature |
-20°F to
180°F (-29°C to 82°C) |
| Seal Type |
Buna-N standard, Optional Viton |
| Relief Valves |
Shim Adjust, Optional Screw Adjust |
| Weight (approx.
non-solenoid) |
Inlet 6 Lbs. (2.7Kg), Outlet 3.5 Lbs.
(1.6Kg), Typical Work Section 9 Lbs. (4.1 Kg) |
Additional literature can be found here;
V20 Series Directional Control Valve Brochure
V20 Series Directional Service Components
|
