Power-Miser Plumbing Diagram

Powr-Pro Plumbing Diagrams

WITHOUT FLOW CONTROL VALVE

WITH VP10 / VP15 FLOW CONTROL VALVE

*VP10 is a Non-Adjustable Flow Control and VP15 is an Adjustable Flow control

*Hose must be routed to return line at reservoir on VP10 / VP15 flow control

P = Pump	V = Directional Control Valve
PPV = POWR-PRO Valve	C = Cylinder
FC = Flow control Valve	R = Reservoir
CL = Crossover Line	PL = Pressure Line
SL = Suction Line	VG = Take Vacuum Readings Here
PG = Take Pressure Readings Here	B = Bypass
LDL = Lube Drain Line	**	Not used with VP15 Flow Control.
F = Return Line Filter		Hose runs directly to tank.

It is recommended that hose between the pump outlet, POWR-PRO valve and back to tank, be 3/8" (9.5mm) ID SAE 100R2 minimum. Maximum recommended vacuum at the inlet of this pump is 5 In. Hg. (.17 Bar).